NEWS CENTER

Check category
/
/
/
One drill one planting multifunctional five-axis drilling and hair transplanting conjoined machine was successfully developed

One drill one planting multifunctional five-axis drilling and hair transplanting conjoined machine was successfully developed

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2009-10-17 17:44
  • Views:

(Summary description)Based on customer surveys and combined with the actual needs of some customers, our company has recently successfully developed a drilling and tufting machine. This machine is mainly developed for the drilling and planting of long stick brushes. Compared with the traditional long stick brush machines seen on the market, it has two most notable features: First, the structure is reasonable. It only needs to be operated by one person, which is convenient and trouble-free. The second is to save time and increase production efficiency exponentially.

One drill one planting multifunctional five-axis drilling and hair transplanting conjoined machine was successfully developed

(Summary description)Based on customer surveys and combined with the actual needs of some customers, our company has recently successfully developed a drilling and tufting machine. This machine is mainly developed for the drilling and planting of long stick brushes. Compared with the traditional long stick brush machines seen on the market, it has two most notable features: First, the structure is reasonable. It only needs to be operated by one person, which is convenient and trouble-free. The second is to save time and increase production efficiency exponentially.

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2009-10-17 17:44
  • Views:
Information

  Based on customer surveys and combined with the actual needs of some customers, our company has recently successfully developed a drilling and tufting machine. This machine is mainly developed for the drilling and planting of long stick brushes. Compared with the traditional long stick brush machines seen on the market, it has two most notable features: First, the structure is reasonable. It only needs to be operated by one person, which is convenient and trouble-free. The second is to save time and increase production efficiency exponentially.

  This machine is mainly composed of two parts-the drilling/hair transplanting head and the stick brush workbench. Now make a brief introduction one by one: The drilling and transplanting head adopts the integrated design of the drilling head and the hair transplanting head to simplify The program is easy to install, and has different mechanical functions from the previous drilling and tufting machines. We all know that the existing long stick brush must be drilled first, and then tens of thousands of holes must be drilled before being removed and placed. It takes two to three people to complete the hair transplanting machine, which is time-consuming and laborious! Our company has successfully developed this drilling and transplanting machine for the sake of customers, and changed its processing method in order to achieve the effect of saving time and effort. During processing, the drilling head first drills a part of the hole. At this time, the planting head cannot move. When the drilled hole reaches the planting head, the drilling and planting can be completed at this time. That is to say, the drilling head and the planting head need to Work at the same time and must be synchronized, otherwise the work cannot be completed. When the drilling of the entire brush handle is completed, the drill bit must stop at this time, and the hair transplanting head must continue to work until all the holes have been transplanted. This shows a problem: the clamping can be completed once, reducing manpower and reducing the trouble of secondary clamping. The drilling and hair transplanting are synchronized, so the efficiency of the traditional hair transplanting method can be doubled several times. This machine has achieved such an effect, so I have to introduce the mechanical structure and function of the drilling and planting head. The drilling head and the hair transplanting head can work independently or simultaneously without interfering with each other. The latest development of mechanical clutch technology (patent pending) is used to control them.

  Previously, there was also a one-piece machine in which the drilling head and the hair transplanting head were connected together. There are two ways to combine them. Now let’s briefly introduce: in contrast to the newly developed one, one is to use an electronic clutch for the drilling head and the hair transplanting head. Connected together, this one can move the two heads separately, but the performance is very poor during synchronization, and it is often unable to synchronize, so it cannot work normally. The other is to use a shaft to connect the drilling head and the hair transplanting head. Although this type solves the synchronization problem, the disadvantage is that the two heads cannot act independently, which limits its scope of use. The drilling and tufting machine equipped with a mechanical clutch is different. It can be set as you like and has good stability. Let me mention the workbench again. The existing workbench is also specially designed and manufactured for stick brushes. It uses precision imported guide rails, has good mechanical performance, is equipped with two axes, and is driven by all servo motors. It can be used to complete hair transplantation in a straight line or rotate. And the brush handle can be adjusted according to the actual situation, that is, the height of the clamping position at both ends. The length of the planting hair is between 25mm-85mm on the floating surface, and the length of the brush handle is less than or equal to 4M. The height of the drilling and tufting head can also be adjusted according to actual needs, and the stroke is between 0-300mm.

  For specific equipment, please refer to the content of the following URL link:

  Picture and parameters:http://www.cpncm.com.cn/View.Asp?ID=431&Type=3&Type2=18

  Production video:http://www.cpncm.com.cn/View.Asp?id=420&Type=3&Type2=50

NEWS

暂时没有内容信息显示
Please add data record on website background.

Recommended news

China

China Open Market Release: Hubei Zhifeng CNC Machinery

Hubei Zhifeng CNC Machinery Co., Ltd. sincerely welcomes your visit! Company address: No. 150, Jinqiu Avenue, Industrial Park, Anlu City, Hubei Province, China Tel: 86-0712-5255318 Mobile/WeChat: 13677129888 Chairman and General Manager: Chen Yongzhi leads all The staff sincerely welcome your visit!
2021-03-23
CIBRUSH

CIBRUSH Organizing Committee visited China's brush industry enterprises series of reports-Hubei Zhifeng CNC Machinery

On October 29, 2015, a three-person group of CIBRUSH organizing committee came to Anlu, Hubei, where the factory of Hubei Zhifeng CNC Machinery Co., Ltd. is located. Zhifeng has been deeply involved in the brush-making equipment industry for more than 30 years, has dozens of industry inventions, and has accumulated a high reputation in the industry.
2015-10-30
2012

2012 Hannover Messe, Germany

Exhibition location: Tuyap Exhibition and Conference Center, Istanbul, Turkey Exhibition time: 2012.02.02-02.05    Exhibition cycle: once a year Exhibition location: Turkey, Istanbul Organizer: Germany Hannover Exhibition Company, Hannover Exhibition (Turkey) Co., Ltd. Exhibition area :60,000 square meters
2012-01-02
2012

2012 China International Import Products Expo

Metal cutting machine tools, metal forming machine tools, special processing machine tools and related equipment, inspection and measuring equipment, numerical control systems and equipment, rail transit technology and equipment, advanced medical equipment, textile machinery, printing machinery, rail transit technology and equipment, digital display Equipment and machine tool electrical appliances, machine tool parts and auxiliary equipment, abrasives and technology, cutting tools, fixtures and related products, etc.;
2012-01-11
上一页
1
2
...
12